| |
Hamamatsu Model LC8
The Hamamatsu LC8 utilizes a 200w Mercury-Xenon lamp paired with a quartz light guide to provide an output of 4500mw/cm2. The lamp’s patented revolutionary electrode design boasts an output of >75% (365nm) at 3,000 hours of use! The LC8 allows the user to choose between front and rear ports for light guide positions. Do you loathe the tedious process of replacing lamps? Hamamatsu’s cassette type lamp with preset optical alignment allows for lamp replacement in a matter of seconds! Planning on integrating your LC8? No problem! Hamamatsu offers a full line up of external control equipment as well as the ability to store 9 types of 7 step memory programs. The LC8 can also be ordered with an internal optical feedback function to suit your UV curing needs!
Click Here for More Info |
| |
Hamamatsu Model LC-L3
The Hamamatsu LC-L3 is a fully loaded LED UV curing system! The LC-L3’s offers your choice of high output UV LEDs (365nm or 385nm) that produce a highly uniform irradiation level for up to 20,000 hours! The LC-L3 is a low heat emission light source that is perfect for thermal sensitive applications. A key feature is the ability to program the individual LED irradiation levels in any possible combination! The LC-L3 can also be controlled externally by the “RS-232C” communication or from the front operation panel to suit your process. The LC-L3 is perfect for UV adhesive curing, UV ink drying, semi-conductor and liquid crystal exposure any many more UV applications!
Click Here for More Info |
| |
Hamamatsu Model LC-L2
The Hamamatsu LC-L2 is our most compact UV LED curing system yet! Boasting an output of up to 7500mw/cm2 (365nm) at up to 20,000 hours the LC-L2 is quickly becoming the preferred replacement for traditional UV spot cures. With it’s sleek reduced footprint the LC-L2 saves up to 98% cubic volume compared to the conventional Hamamatsu LC-L1. No feedback circuits and temperature sensors are required for minimal thermal dissipation. Hamamatsu’s heat dissipating technology alloys the user to maintain a stable light output with just a clamping jig! Planning on using the LC-L2 in a clean room? No problem as the LC-L2 does not utilize a fan which eliminates dust, vibration and general maintenance overall. The LC-L2 is a “Green” technology as it requires only 8w to operate! The LC-L2 may also be controlled externally using the RS-232C. The LC-L2 is the ideal candidate for your UV adhesive curing and irradiation experiment needs!
Click Here for More Info |
| |
Hamamatsu Model LC-L1
The Hamamatsu LC-L1 is a UV LED light source that emits nearly monochromatic light at a peak of 365nm. The light emitted from the LC-L1 does not contain heat rays so thermal effects on the target object are minimal. The built in LED has a very long life of up to 20,000 hours and has a peak irradiance of 4600mw/cm2 (365nm). The LC-L1 is very compact saving over 60% cubic volume than traditional UV spot cure systems. Users have many options available including the ability to use up to 4 UV LED heads at once. The LC-L1 can also be remote controlled simply by using the 15 pin D-sub connector. The LC-L2 is a great choice for your UV adhesive curing and irradiation experiment needs!
Click Here for More Info |
| |
Why Hamamatsu?
Hamamatsu is a one billion dollar optics company. Hamamatsu has built a solid reputation through providing high-quality scientific spot light sources. Please see the example on the left of a LC8 bulb after 3000 hours. This shows almost no degrading offering repeatability like no other arc spot cure available today. If you are looking for an LED spot Hamamatsu now offers a UV LED unit as a "new solution" of UV light sources. These UV LED units were developed by the consolidation our accumulated technologies. Our LED units are a “Green” technology as they reduce the load on the environment. Hamamatsu is simply the best you can buy. Contact Doctoruv.com for more information or a quote today. |
