POWER PUCK II PROFILER

POWER PUCK II PROFILER
 
EIT Power Puck II Profiler contains the same function and features as the standard Power Puck II. The Power Puck II Profiler function allows the transfer of the numerical (irradiance, energy density) values and the irradiance profile to your computer via a USB port for analysis with the new Power View Software II Program.  Profiler Mode adds the ability to transfer the irradiance profile and data to a computer for further analysis and evaluation.

Product Specifications
Suggested Operating Range: 
Standard High Range: UVA, UVB, UVV- 100mW/cm² to 10W/cm² / UVC - 10mW/cm² to 1W/cm²
Mid-Range: UVA, UVB, UVV-10mW/cm2 to 1W/cm2 / UVC-1mW/cm2 to100mW /cm2
Low Power: UVA, UVB, UVV- 1mW/cm² to 100mW/cm² / UVC -1mw/cm2 to 100mW/cm2

Spectral Ranges: Four channel monitoring of
UVA (320-390nm)
UVB (280-320nm)
UVC (250-260nm)
UVV (395-445nm)

Accuracy: +/- 10%; +/- 5% typical plus ±0.2% of full scale Typical +/- 5% or better
Calibration:  Supplied with NIST traceable calibration certificate
PowerView Software III: National Instruments LabVIEW based programming designed for Windows 7-10.  Collected data stored in LabVIEW based *.tdms files

The suggested Operating Ranges are where the instrument performs best. Units will “turn on” and display data at irradiance values much lower than the suggested Operating Ranges.