CONTACT USREQUEST FOR QUOTE

Se Habla Español

Featured Product
MICROCURE ®

MICROCURE ®

Home

> Warehouse Specials > Advanced Energy AC Plasma Power Supply

  • Advanced Energy AC Plasma Power Supply

Advanced Energy AC Plasma Power Supply

ADVANCED ENERGY-4PC
 
0
Quantity:
ADD TO QUOTE 
LM-1.25K ADVANCED ENERGY-LM-1.25K
Pre-owned Advanced Energy step down / up RF match switch box transformer unit.





PE-1000
Pre-owned Advanced Energy AC Plasma Power Supply.  ADVANCED ENERGY-PE-1000
  • Power output can be controlled by internal analog signals entered from the front panel, or by external analog signals provided fromthe user I/O port.
  • Low frequency output controlled in the constant power mode
  • When connected to a safety switch, the interlock string disables the unit if a problem occurs
  • LED's on the front panel show status of interlocks, output enable, plasma ignition, and setpoint level. Remote or local control is also shown
  • Overtemperature and arc are the conditions that shut off the output power
  • Optional load-matching transformer. The transformer's taps allow the PE to efficiently transfer power to a wide range of loads
  • 115 VAC ± 10%, 50/60Hz, single phase
  • 13 A nominal (full power, each box) 0.70 power factor
  • 1,250 kW at 550 V nominal output
  • 50 kHz ± 100 Hz
  • 0°C to 45°C ambient; 9 inches of clearance to rear of unit required; 1 inch clearance on sides and top of unit
  • Humidity: 0-92%, noncondensing
Plasma Chamber
ADVANCED ENERGY-1PC TALL
















SEREN-R1001
Pre-owned Seren Industrial Power Systems, R1001 Generator   
  • 1000 Watts SEREN R1001-1PC SMALL
  • Frequency= 1.7-2.1 MHz, 13.56 MHz
  • Forward power accuracy= +/- 2%
  • Harmonics= -50 dBc
  • Input power= 200-240VAC, 47-63 Hz, single phase
  • Output power= Type "N" female
  • Interface connectors= Serial: DB-9 female; Analog: DB-25 female
  • Pulsing= 0-100% duty cycle, 50 us minimum pulse width
  • Cooling= Forced air, 123 CFM (59.05 L/s)
  • CEX Input- (BNC)= 5V peak to peak, nominal sine wave
  • CEX Output- (BNC)= 6V peak to peak, nominal sine wave
  • SEMI- Third party= SEMI S2, SEMI S8
  • EMC & Safety- Third Party= CE Mark
  • Dimensions= (H, W, D) 7.00" x 9.50" x 18.38" (17.78 x 24.13 x 46.68 cm)
  • Weight= 37 Lbs (16.8 Kg)