Radiometers

Multiple measurement points - up to 32 sensors!
Small, low profile Sensor with cosine response, each calibrated and serialized.
Individual Sensors are single band and are available in any of EIT's four standard (UVA, UVB, UVC or UVV) bandwidths. The sensors can be combined in any combination of bandwidths to meet the measurement needs of your UV source(s) and process.
Sensors are easily attached on either a permanent or a temporary basis. Flexible daisy-chained quick connector system allows the Sensors to be placed exactly where they are needed without creating an octopus maze of cables.
An LED on each Sensor can be toggled via software to easily identify its location on the work piece.

UV PowerMAP measures peak irradiance and total energy density in four spectral regions: UVA, UVB, UVC, and UVV
UV MAP Plus measures the peak irradiance and total energy density for any one channel
Collection and storage of up to 1 million data points for accurate UV and temperature mapping in your system
Collected data displayed in graphical and tabular forms in the PowerView software package
Ultra-fast, user-adjustable sampling rate - up to 2048 samples/second - ensures high resolution even at high speeds

Microprocessor-based, battery-powered miniature UV radiometer
Small Size: 1.3”L x 1.0”W x 0.25”T (33.0mm x 25.4mm x 6.4mm)
Designed to measure UV dose in web printing, container curing, any tight access UV curing application
Fast sample rate - 2000 per second

Measures UV Peak irradiance (microW/cm2, mW/cm2, W/cm2) and total energy density (microJ/cm2, mJ/cm2, J/cm2) of one spectral bandwidth (Uvicure Plus II) or 4 different bandwidths simultaneously (UV Power Puck II).
New graph, data, and reference modes to provide choices in how to view the collected data
Compact Size: 4.6" Diameter (117mm) x 0.5"H (13mm)
Self-contained - battery-powered (user-replaceable AAA batteries)
Unit communicates via cable to your PC

Curing applications of inks, adhesives, solder masks, and epoxies (not for use in web press applications)
Measure lamp performance
Compares the efficiencies of different UV curing systems
Compare any current reading to chosen baseline reference to compare your system over time
Establish UV level for proper curing

Specifically for measuring pulsed UV light
Combines compact size and robust design to withstand the extremes of UV curing production environments
Provides accurate and repeatable measurements

Monitors the output of a UV “spot curing” system
Provides indication of light guide degradation and spot curing system degradation
Standard range version measures UV irradiance up to 19.99 Watts/cm²
Provides convenient way to measure the total UV energy striking a work piece
Includes several different size light guide adaptors for maximum flexibility

Measure UV system performance particularly in applications where measurement space is limited or it is difficult to establish
Establish, document and maintain UV process windows
Measures UV irradiance up to 10 Watts/cm²
Wide dynamic range (100,000:1) allows multiple uses from production curing (high irradiance) to stray hazard (low irradiance) applications
Single hand operation
Meet ISO, quality and customer requirements for SPC/SQC

Improved optics virtually eliminate solarization
Small size for installation in most UV vessels.
For use with most UV lamp makes and types
Sealed optics to prevent contamination
Stainless Steel Body
Compatible with all EIT monitoring equipment
The thread is 3/4-16 UNF. Note: this it is not a straight or tapered National Pipe size (NPS/NPT), but is the same V thread as a standard ANSI machine screw. This is a standard for inspection ports on most of the UV reactor equipment. Comes in UVC bandwidth of 240nm to 260 nm. Model# USWATER254-C


	Privacy	Copyright 2008 - All right reserved	Terms of Use